Back to Blog
Product Reviews 2026-11-20 Austin Camera 0 views

Using the Kodak Polycontrast Filter Set with Variable Contrast Paper

Using the Kodak Polycontrast Filter Set with Variable Contrast Paper

Learn how to use the Kodak Polycontrast Filter Set to control contrast when printing black and white darkroom prints with variable contrast paper.

What the Kodak Polycontrast Filter Set Does

When you print black and white negatives in the darkroom, variable contrast paper lets you change the contrast of the final print by using different filters under the enlarger lens. The Kodak Polycontrast Filter Set is a collection of seven filters, each providing a different degree of contrast. By selecting the right filter, you can make a flat negative look punchier or tame a harsh negative for a softer image.

The Set at a Glance

  • Kodak Polycontrast Filter Set - USED: Set with 7 filters with varying degrees of contrast. Seven filters give you a useful range of contrast grades, so you can match the filter to the density of your negative and the look you want.
    Kodak Polycontrast Filter Set - USED
    Kodak Polycontrast Filter Set - USED
  • Kodak Polycontrast Filter Set - USED: For use with an enlarger to print black and white darkroom prints. This set is designed specifically for enlarger-based printing with variable contrast paper. It is not for use with graded paper or for camera filters.

How to Use the Filters

Using the Polycontrast set is straightforward, but a few practical steps help ensure consistent results.

  1. Place the filter under the enlarger lens: Most darkroom setups use a filter drawer above the lens or a filter holder below it. The Polycontrast filters are acetate and should be placed in the light path between the negative and the paper.
  2. Select the filter for your desired contrast: Lower-number filters (e.g., 1 or 2) produce softer, lower contrast. Higher-number filters (e.g., 4 or 5) produce harder, higher contrast. Start with a middle filter like 3 and adjust based on your test print.
  3. Make a test strip: Expose a test strip using the chosen filter to find the correct exposure time. Changing filters may change the exposure time slightly, so a new test strip is recommended.
  4. Evaluate and adjust: If the test print lacks shadow detail or looks flat, switch to a higher contrast filter. If highlights are blown out or the print looks too harsh, switch to a lower contrast filter.

Choosing the Right Filter for Your Negative

There is no single correct filter for a given negative. The best choice depends on the density range of your negative and the look you want. A thin, underexposed negative often needs a higher contrast filter to add snap. A dense, overexposed negative may need a lower contrast filter to keep highlights printable. The seven filters in the Polycontrast set give you enough range to handle most black and white negatives.

What the Supplied Information Does Not Cover

The catalog record does not specify the exact contrast grade numbers (e.g., 0 through 5) for each filter, nor does it provide recommended exposure compensation for each filter. You will need to test each filter with your specific enlarger, paper, and developer combination. The set comes as a used item that has been tested and works, with a 90-day warranty, but individual filter condition may vary.

Related Articles

Customer Service
Home
Products
Cart
Profile