Why tray size matters for 11x14 prints
The Paterson Developing Tray 12×16″ (30.5 × 40.6 cm) is sized for prints up to 11×14″. That extra inch or so around the print gives you room to agitate and lift the print without catching an edge. If you are printing 11×14, this is the tray size that matches your paper.
The tray is made from a hard, durable, chemical-resistant plastic. That matters because developing trays sit in chemistry for long sessions. The base design is also shaped to give maximum economy of solution and easy print removal, and there is a convenient pouring lip for drip-free emptying.
What the Paterson tray confirms
- Paterson Developing Tray 12×16″ - White - For 11×14 Prints: This is a single white tray that is 12 x 16″ (30.5 x 40.6cm) in dimension, for prints sizes up to 11 x 14″. It tells you the tray is correctly sized for 11×14 paper, not a tray that is too small or unnecessarily large.

Paterson Developing Tray 12×16″ - White - For 11×14 Prints - Paterson Developing Tray 12×16″ - White - For 11×14 Prints: The trays base design gives maximum economy of solution and easy print removal, with a convenient pouring lip for drip-free emptying. These design details affect how much chemistry you mix and how cleanly you can work between steps.
- Paterson Developing Tray 12×16″ - White - For 11×14 Prints: Stackable for easy storage. Darkroom space is often tight, so stacking helps keep trays organized when not in use.
A simple workflow for black and white print processing
- Set up your trays in order: Line up your trays for developer, stop bath, fixer, and wash. The Paterson tray is available in white, grey, and red, so you can use color to tell chemicals apart under safelight conditions. This single tray is white; if you want color coding, consider the three-color set.
- Mix only the chemistry you need: The base design is intended for maximum economy of solution. That means you can work with a smaller volume rather than filling the tray to the brim. Follow your chemistry instructions for the correct dilution and volume for your tray size.
- Place the print and agitate gently: Slide the print into the solution and agitate according to your process. The tray’s easy print removal design helps you lift the print without scratching it when moving to the next bath.
- Empty with the pouring lip: When it is time to change chemistry, use the convenient pouring lip to empty the tray without drips. Rinse the tray thoroughly before using it with a different chemical.
- Stack and store: Once clean and dry, stack the trays to save space. Keep them away from dust and contaminants between sessions.
Choosing between a single tray and a color-coded set
The Paterson Developing Tray is available individually or in sets of 3 with one of each color. This listing is for a single white tray. If you are building a black and white print workflow from scratch, a set of three trays in different colors can help you avoid cross-contamination and keep your process consistent under safelight conditions. If you already have trays and just need one more for a specific size, the single tray is the straightforward choice.
Checkpoints before you start printing
- Confirm your paper size: This tray is for prints up to 11×14″. If you print larger, you will need a larger tray.
- Check your chemistry volume: The tray’s base design is intended for economy of solution, but you still need enough chemistry to cover the print. Follow your developer and fixer instructions for the correct volume.
- Plan your tray layout: Arrange trays in the order you will use them. If you use multiple colors, assign each color to a specific chemical and keep that consistent.
- Clean and dry trays between sessions: Residue from one chemical can affect the next. Rinse and dry trays thoroughly after use.
What the supplied information does not cover
The supplied product record does not include specific instructions for chemical compatibility, cleaning procedures, or maximum solution volumes. It also does not state whether the tray is safe for all darkroom chemicals. For those details, check the tray’s packaging or contact the manufacturer. Treat the guidance above as a practical starting point based on the tray’s design, not as a substitute for the manufacturer’s instructions.


